This watering kit is perfect for a 50m2 lawn. With the MP Rotators included in this kit your lawn will be looking great all year round, with the double pop feature to keep dirt and debris out of the nozzle and the removeable filter screen you'll not worry about these heads getting blocked up. this easy to install kit connects up to most outside taps and can also be easily connected up to any of our tap timers (see below) so you can go away on holiday and feel confident that your lawn is getting the water it needs.
4 x Pro Spray Bodies with Check Valves
4 x MP 2000 90 - 210 Degrees
50m x 20mm LDPE Pipe
3 x 20mm x 1/2" Tefen Tee
1 x 20mm x 1/2" Tefen Elbow
8 x 1/2" Hose Clips
1 x 20mm x 3/4" Barbed Tap Connector
1 x 3/4" Male Thread x Female Snap Lock Fitting
Minimum Flow: 376 L/ph.
Minimum Pressure: 1.75 Bar
Maximum Pressure: 3.5 Bar*
Need help with measuring your flow? Follow this link to our blog articles for a step by step guide https://shop.ejwoollard.co.uk/blog
This drawing is only to show the ideal set up for this kit.
Kit can be set up in different orientation if necessary but may incur a need for greater flow.
*Pressure regulator may be required if in a high-pressure area. ** 3 Bar and 90-degree arc setting was used to plan out this kit and please be aware that lower pressures will reduce radius of the MP Rotator and higher pressure will extend radius. If the arc setting is increased this will also increase the required flow.